Alloys: 1100, 2014, 2018, 2025, 2218, 2219, 2618, 3003, 4032, 5083, 5456, 6053, 6061, 6066, 6151, 6A02, 7050, 7075, 7175
Status: H111, H112, T4, T6, T61, T72, T73, T7352
Starting Quantity: According to the Agreement between Supply and Demand
Typical applications of Aluminium Die Forgings: piston of aircraft engine and diesel engine, cylinder head of aircraft engine, impeller and compressor ring of jet engine, outer wing beam of aircraft wing
Brief Introduction of Aluminium Die Forgings Products
Aluminium Die Forgings can be divided into open die forging, closed die forging, extrusion die forging, multi-direction die forging, distributed die forging and isothermal die forging. It can provide 9 m in length, 2.5 m in width, 4.0_in projection area, 1.2_in projection area for superalloy, titanium alloy and steel forgings. According to ISO 9001, AS9100 (civil aviation), PrEN9100 (aviation), GJB9001 (military standard), ISO/TSI6949 five quality system certification selection of supply. Note: When the thickness of forging is machined before heat treatment, if the thickness of forging is not less than half of the original thickness, its performance can also be applied to the thickness of heat treatment after heat treatment.
Production Process of Aluminium Die Forgings
Ingot - interruption of car skin - heating - pier rough punching - drilling, car center hole - heating - reaming - machining - quenching - straightening - aging - testing - Sampling - physical and chemical testing - Hardness testing - acceptance - packaging
Brief Introduction of Aluminium Die Forgings Production Equipment
6000 tons free forging hydraulic press
Free forging has a single weight of 4 tons, a width of 2.5 m, a length of 10 m, a forging ring of 3.9 m, and a diameter of 700*40*2200.
10000 ton multidirectional die forging hydraulic press
The projection area of die forgings is 0.33(aluminium), the length is 2 m, the width is 1 m, and the height is 0.8 M.
30000 tons die forging hydraulic press
The projection area of die forgings is 2_ (aluminium), 1.2_ (titanium, steel), 9 m in length, 2.5 m in width and 1 m in height.
5 mm NC radial and axial ring rolling mill
Diameter 700-5000mm (height below 200mm) and height 80-800mm (height below 2500mm)