English | Español | 日本語| 中文



7075 Aluminum forgings forged product parts

1, 7075 aluminum alloy is a cold-treated forging alloy, high strength, far better than soft steel. 7075 is one of the most powerful alloys for commercial use. Subject to heat treatment, very high strength properties can be achieved. 7075 materials are generally added with a small amount of copper, chromium and other alloys. Among them, 7075-T651 aluminum alloy is especially top grade. It is known as the best product in aluminum alloy, with high strength and far better than any mild steel. This alloy has good mechanical and anodic reaction.
       2, 7075 mainly contains zinc. Also belonging to the aviation series, it is aluminum-magnesium-zinc-copper alloy, which is a heat-treatable alloy. It belongs to super-hard aluminum alloy and has good wear resistance. The 7075 aluminum plate is stress-relieved and will not be deformed or warped after processing. All super-super The thick 7075 aluminum plate is ultrasonically detected to ensure no blisters and impurities. The 7075 aluminum plate has high thermal conductivity, which can shorten the molding time and improve work efficiency. The main feature is that the hardness of 7075 is a high hardness, high strength aluminum alloy, commonly used in the manufacture of aircraft structures and futures. It requires high-strength structural parts and molds with high strength and corrosion resistance.




Alloy grade Si Fe Cu Mn Mg Cr Zn Ti Zr Other AL
new alloy grade old alloy grade 0.4 0.5 1.2-2.0 0.3 2.1-2.9 0.18-0.28 5.1-6.1 0.2 —— every total
7075 —— 0.05    

7075 Aluminum forgings forged product parts





Alloy grade aluminum alloy grade and
tensile strength
Yield Strength
Elongation/% hardness/ HBWα
7075-T6 572 503 11 150

Copyright @ 2016-2029 Henan Chalco Henan Chalco