Introduction of 7075 t652 forged aluminum block plate
7075 t652 forged aluminum block plate is a cold-treated forging alloy, which is used to manufacture aircraft structures and other high-stress structural parts that require high strength and strong corrosion resistance, such as aircraft upper and lower wing panels, stringers, bulkheads, etc. After solution treatment, the plasticity is good, and the heat treatment strengthening effect is particularly good. It has high strength below 150°C, and has particularly good low temperature strength, poor welding performance, and strong corrosion cracking tendency.
Chemical composition of 7075 t652 forged aluminum block plate
Si: 0.40
Fe: 0.50
Cu: 1.2-2.0
Mn: 0.30
Mg: 2.1-2.9
Cr: 0.18-0.28
Zn: 5.1-6.1
Ti: 0.20
Al: balance
Others: Single: 0.05 Total: 0.15
Application of 7075 t652 forged aluminum block plate
7075 t652 forged aluminum block plate are used in the aerospace industry, blow molding (bottle) molds, ultrasonic plastic welding molds, ball heads, shoe molds, paper molds, foam molding molds, dewaxing molds, templates. Cheek machinery and equipment , Mold processing, used to make high-end aluminum alloy bicycle frames.
7075 t652 forged aluminum block plate is a cold-treated forging alloy, which is used to manufacture aircraft structures and other high-stress structural parts that require high strength and strong corrosion resistance, such as aircraft upper and lower wing panels, stringers, bulkheads, etc. After solution treatment, the plasticity is good, and the heat treatment strengthening effect is particularly good. It has high strength below 150°C, and has particularly good low temperature strength, poor welding performance, and strong corrosion cracking tendency.
Chemical composition of 7075 t652 forged aluminum block plate
Si: 0.40
Fe: 0.50
Cu: 1.2-2.0
Mn: 0.30
Mg: 2.1-2.9
Cr: 0.18-0.28
Zn: 5.1-6.1
Ti: 0.20
Al: balance
Others: Single: 0.05 Total: 0.15
Application of 7075 t652 forged aluminum block plate
7075 t652 forged aluminum block plate are used in the aerospace industry, blow molding (bottle) molds, ultrasonic plastic welding molds, ball heads, shoe molds, paper molds, foam molding molds, dewaxing molds, templates. Cheek machinery and equipment , Mold processing, used to make high-end aluminum alloy bicycle frames.
