English | Español | 日本語| 中文



7075 aluminum forgings

Introduction of 7075 aluminum forgings:
7075 aluminum forgings is a kind of high-strength cold-treated forging alloy. Its material does not undergo phase change below 500 °C. It is also one of the most powerful alloys commercially available. The small grains make the deep drilling performance better, the tool wear resistance is enhanced, and the thread rolling is unique, which is the object of many companies' favor.

7075 aluminum forgings
Chemical composition of 7075 aluminum forgings
Si: 0.40
Fe: 0.50
Cu: 1.2-2.0
Mn: 0.30
Mg: 2.1-2.9
Cr: 0.18-0.28
Zn: 5.1-6.1
Ti: 0.20
Al: balance
Others: Single: 0.05 Total: 0.15
Application of 7075 aluminum forgings
The residual stress of aluminum alloy materials due to heat treatment is mainly limited to a few high-strength aluminum alloys. Foreign research mainly focuses on several high-strength aluminum alloy materials used in aerospace, such as 2024, 7075, 7050, etc. 7075 aluminum forgings are mainly used in aerospace and other military industries,

Copyright @ 2016-2029 Henan Chalco Henan Chalco