Introduction of 7075 Aluminum Alloy Forged Blocks
7075 Aluminum Alloy Forged Blocks is an Al-Zn-Mg-Cu series heat-treatable high-strength deformed aluminum alloy. It is widely used because of its higher specific strength, better hot workability and weldability. It has been used at present. In order to reduce the weight of load-bearing structural parts such as weapon equipment and large pressure vessels, especially in the field of aerospace weapon equipment, the trend of high technology, intelligence and integration is obvious, and the overall structure design is adopted as much as possible in the part structure. , Such as wings, fuselage integral girder, integral reinforcement frame, integral fuel tank, etc.
Chemical composition of 7075 Aluminum Alloy Forged Blocks
Silicon Si: 0.40
Iron Fe: 0.50
Copper Cu: 1.2-2.0
Manganese Mn: 0.30
Magnesium: 2.1-2.9
Chromium Cr: 0.18-0.28
Zinc Zn: 5.1-6.1
Titanium: 0.20
Aluminum Al: margin
Others: Single: 0.05 Total: 0.15
Application of 7075 Aluminum Alloy Forged Blocks
7075 Aluminum Alloy Forged Blocks is used to reduce the weight of load-bearing structural parts such as weapons and large pressure vessels, especially in the field of aerospace weapons and equipment
7075 Aluminum Alloy Forged Blocks is an Al-Zn-Mg-Cu series heat-treatable high-strength deformed aluminum alloy. It is widely used because of its higher specific strength, better hot workability and weldability. It has been used at present. In order to reduce the weight of load-bearing structural parts such as weapon equipment and large pressure vessels, especially in the field of aerospace weapon equipment, the trend of high technology, intelligence and integration is obvious, and the overall structure design is adopted as much as possible in the part structure. , Such as wings, fuselage integral girder, integral reinforcement frame, integral fuel tank, etc.
Chemical composition of 7075 Aluminum Alloy Forged Blocks
Silicon Si: 0.40
Iron Fe: 0.50
Copper Cu: 1.2-2.0
Manganese Mn: 0.30
Magnesium: 2.1-2.9
Chromium Cr: 0.18-0.28
Zinc Zn: 5.1-6.1
Titanium: 0.20
Aluminum Al: margin
Others: Single: 0.05 Total: 0.15
Application of 7075 Aluminum Alloy Forged Blocks
7075 Aluminum Alloy Forged Blocks is used to reduce the weight of load-bearing structural parts such as weapons and large pressure vessels, especially in the field of aerospace weapons and equipment
